Filtration

Dust-Management>>>industrial tool

The core of this sector is primarily to solve the problem on the basis of the perfect project. After the precise definition of parameters which will become the assignment for acquiring of the optimum technology, the data are entered into the I-T-Search database, which determines the pool of manufacturers and suppliers in the optimal ratio to the project requirements.

Dust/material filtration>>>solution

Introduction:

Dust and material filtration is an obvious part of each modern exhaustion/dedusting system. Increasing the requirements for lack of dust and health and environmental protection are the main reasons the efficiency of the filters continuously improve, emissions of dust decreases, and the lifetime of filters extend. The results of these efforts are filters with excellent parameters and efficient economy – the increased life time of the filtration media for many years is a savings not only for the user, but also a benefit for the environment. Thanks to the high efficiency of the filters, the filtered air can, in most cases, be returned back to the production hall without any loss of thermal energy and with a great economic benefit.

Oil-Mist-Management>>>industrial tool

Professionally solves the field of exhaustion, vacuuming, filtration, separation, and elimination of oil exhalations and oil mist in industrial processes.

Oil mist, oil exhalations, and oil are a common problem in the industry, especially where machining occurs and various emulsions are used, etc. O-M-M is a part of PROENVISS and it is, with the help of other sectors, specialized in exhaustion and removing oil waste products. As usual, it is first of all necessary to perform the acts on the principle of the so called perfect project, which contains everything from the primary evaluation and consultation up to the eventual project and realization.

Aerosol filtration>>>solution

Introduction:

Filtration of air with a high content of aerosols, mainly air with oil and cutting emulsions, is a typical solution in the metal-industry and related industries. A typical application for the filtration of air with aerosols are CNC machines, milling machines, drilling equipment, and others which need oils or emulsions for the cooling of the worked material and tools, which subsequently create aerosol due to the tools movement. The individual devices, material, and used media vary from each other; therefore one can’t use one single solution of exhaustion and filtration. By using Oil-Mist-management, in compliance with PROENVISS, a specific solution is created and the best application is chosen.

Air-Technique-management>>>industrial tool

Projects, solutions, realization, and management of a complete air-technique in industrial halls and commercial buildings and in civil engineering buildings using the interoperation of other EP fields.

Waste products filtration>>>solution

Introduction:

Waste product filtration is directly dependent on their origin and character; if the waste products are microscopically fine particles, usually called fumes, then the filtration is done in a mechanical way. Most of the time, the waste products are volatile organic substances released during production that are often carcinogenic, harming health and the environment. Because they are combustible, they are also dangerous because of the danger of combustion and explosiveness in certain concentrations. All places of origination must be perfectly exhausted by a strong air current and the system must be antistatic in design and grounded; the filtration is most often performed by special active filters (filled with active coal) working on the principle of absorption of volatile materials. In the case of large volumes of these materials, there must be an option of easy regeneration of active filters, which allows the decrease of operational costs to optimum level. In the case of some specific waste products (exhalations of aggressive substances – e.g. acids or alkali), the filtration is most often solved by chemical washing during which the waste products are captured and neutralized.

Fumes filtration>>>solution

Introduction:

Fumes are a mixture of air with microscopic particles of materials which are thermally treated or burned: metal oxides or oxides of other elements, hydrocarbons, fine particles of organic materials, etc. The exigency of their exhaustion and filtration is increased by the fact, that many of them are dangerous to health, and, in some cases, are combustible or otherwise harmful materials. The most common is the fumes filtration used during welding, soldering, cutting by laser, plasma, or flame (and other operation of thermal processing and material modifications); the fume is often distinguished as oily or dry pursuant to the share of the combustion gases from grease, lubricants, or preservatives present in the fume. Within the PROENVISS, the customer’s requirements are solved using the Dust-Management and Dangerous-Material-Management (focused on dangerous materials and substances) products.